Our management software, Security Door Monitoring Server, can either have one or multiple units connected to it at one time in order to easily monitor the data from our two-sensor
How to Configure Settings for Each Verification Method
There are various verification methods to give access through a terminal and to the door system, but each method requires a different configuration. 1. Temperature Verification OnlyTo configure for temperature
How to Configure Settings for Card Reader Access Control
3rd-Party Card Reader: Make sure the Wiegand protocol is either 26 or 34, and make sure that all of the connections are correct. Once that information has been confirmed, then
How to Use With 2M Station
2M Station will be able to: Send email notifications based on Wearing a Mask and Not Wearing a Mask Send email notifications based on High Temperature Realtime Monitoring of multiple
Card Access
Built-in Card Reader: only supports MiFare cards at a frequency reading of 13.563rd – Party Card Reader: only supports Wiegand 26 and Wiegand 34 protocol There are two types of
Authentication Methods
Temperature Verification only Face Detection + Temperature Face Recognition + Temperature Face Recognition + Temperature + Card Access Temperature verification: the terminal will check whether or not a high body
How can I change the language on the 2MITD?
Press “Select” Press “Adjust” Input password “1234” Input password “1316” Input the language number Press “Enter” to exit the menu
What languages does the 2MITD support?
The 2MITD currently supports these 17 languages: 00: Chinese01: English02: English Male03: Kazakh04: Spanish05: Japanese06: Thai07: Vietnamese08: Italian09: French10: Arabic11: Romanian12: Chinese (Taiwan)13: Dialect USA14: Portuguese15: Hebrew16: Ticking Alarm17: Turkish18:
Why can my device not be accessed through the IP address?
Sometimes you might try to log into your device through the IP address on a computer but it gives you an error (ie. “Cannot be reached”, “Cannot be found”). This